Powering On/Off The Projector - ViewSonic PJD6210 User Manual

Powering On/Off the Projector

Powering On the Projector:
1. Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
3. Press
control to turn on the projector.
The projector takes a minute or so to warm up.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
If you are connecting multiple sources to the projector simultaneously, press
the left button on the control panel or the Source button on the remote
control.
Warning
Remove the lens cap first before powering on.
Never look into the lens when the lamp is on. This can damage your eyes.
This focal point concentrates high temperature. Do not place any object near
it to avoid possible fire hazard.
Powering Off the Projector:
1. Press
control to turn off the projector lamp. You will see a message "Power off? Press
Power again" appear on the screen.
2. Press
control again to confirm.
The cooling fans continue to operate for cooling cycle.
When the Lamp LED begins flashing, the projector has entered stand-by mode.
If you want to turn the projector back on, you must wait until the projector has
completed the cooling cycle and has entered stand-by mode. Once in stand-
by mode, simply press
on the remote control to restart the projector.
3. Disconnect the AC power cord from the electrical outlet and the projector.
4. Do not turn on the projector right after power off.
5. This projector supports Off-To-Go function. User can safely cut off the power
source immediately without causing harm to the projector lamp.
ViewSonic
button on the control panel or the POWER button on the remote
button on the control panel or the POWER button on the remote
button on the control panel or the POWER button on the remote
Using Off-To-Go function will interrupt projector's normal shutdown sequence.
The previously interrupted shutdown sequence (3-5 min) still needs to be
completed first prior the projector can power up the next time.
button on the control panel or the POWER button
5
PJD6210/PJD6210-WH