Makita CF003G Instruction Manual page 11

NOTE: Depending on the battery cartridge type and
its remaining capacity, the auto-off timer may be
activated earlier than the set time.
Using AC adaptor
WARNING:
Never use the appliance when the
cord or plug is damaged.
WARNING:
Do not handle the plug with wet or
greasy hand.
WARNING:
Do not leave the AC adaptor dis-
connected from the appliance while the power is
supplied from the mains. Small children may put the
live plug in their mouth and cause injury.
WARNING:
Do not put the live plug or cord
into your mouth. Doing so might cause an electric
shock.
Insert the 13V DC plug of AC adaptor into the 13V DC
socket, and then plug the AC pins into a main power
supply. Make sure that the voltage rating of the main
power supply corresponds with that of the adaptor.
► Fig.10
NOTE: After the AC adaptor is connected, the appli-
ance may take 3–5 seconds to start.
NOTE: The adaptor might creak while using it for the
power supply. This doesn't affect normal use.
NOTE: Even operating in DC power mode, the appli-
ance is automatically changed into AC power mode
when plugged in.
NOTE: When the cordless fan switches the power
mode from DC to AC, and vice versa, the wind speed
may change temporarily.
NOTE: The AC adaptor does not charge the battery
inserted to the appliance.
MAKPAC cart
Optional accessory
CAUTION:
Make sure that MAKPAC cart is
securely attached to the appliance. The appliance
may come off MAKPAC cart and falling accident may
occur.
By attaching the appliance to MAKPAC cart, it can be
moved around while working.
When using MAKPAC cart, attach the appliance to
MAKPAC cart as shown below.
► Fig.11
NOTICE:
Lock the stopper when not moving
MAKPAC cart.
► Fig.12: 1. Stopper
MAINTENANCE
CAUTION:
Always be sure that the appliance
is switched off, unplugged, and the battery car-
tridge is removed before attempting to perform
inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
General maintenance
After the appliance is cooled, use clean clothes to
remove dirt, dust, oil, grease etc.
WARNING:
Authorized Service Center.
Fan Cleaning
CAUTION:
Ensure that the fan is switched off
from the supply mains before removing the guard.
When cleaning the inside of fan-cover, loosen the
screws on the front of the fan cover and remove
fan-cover.
► Fig.13: 1. Screw
► Fig.14: 1. Fan-cover
Wipe off the fan and fan-cover using a cloth dampened
in soapy water.
CAUTION:
Always make sure that the fan-
cover is attached before use.
CAUTION:
Attach the fan-cover securely. If
the fan-cover is attached halfway or incorrectly, it may
come off and result in personal injury or damage to
the appliance.
NOTICE:
Avoid applying too much load on the
fan-cover. It may lead to breakage.
Storage
To prevent fire or burning, allow the appliance to cool
down completely before you store it. Do not store the
discharged battery for long periods, as it can shorten its
service life.
11 ENGLISH
All parts should be replaced at an