Terrco 6200 Operating Instructions, Maintenance Instructions, Spare Part List page 2

HP/KW
SWEEP OF DISCS
ABRASIVE PRESSURE
WIDTH OF MACHINE
LENGTH OF MACHINE
HEIGHT OF MACHINE
NET WEIGHT
SHIPPING WEIGHT
WATER TANK
POWER CORD (4-4)
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
Opposite rotating heads mean the
operator does NOT ght the mahcine.
ELECTRICAL OPTIONS
VOLTAGE
PHASE
DRIVE
AMP DRAW
BREAKER (AMPS)
STONE HOLDER RPM
222 1st Avenue NW • Watertown, SD 57201
Phone: (605) 882-3888 • Fax: (605) 882-0778
Website: www.terrco.com • Email: info@terrco.com
MODEL 6200
40/30
53-1/2" (1360 mm)
1885 lbs (855 kg)
55" (1400 mm)
80" (2032 mm)
54" (1371 mm)
2400 lbs (1090 kg)
2650 lbs (1200 kg)
18 gallons (68 l)
100 ft (30.5 m)
230 460
3
MANUAL MANUAL
60
80-100
510 510
Terrco
• Ten 42 lbs. Pocket Weights
• Stainless Steel Water Tank
• Stainless Steel Guards
• Wet/Dry Setup
• Direct Drive,
• Self-propelled
• Handle separates from the gear case to allow
handle and case to pass through a standard
36" door
PRODUCTION RATES
• Mastic removal rate of 1,800 sq. ft. per hour
• Thin-set removal rates of 2,400 sq. ft. per hour
• Thin-Mil coatings removal rates of 1,400
sq. ft. per hour.
• Concrete polishing rates of 8,000 sq. ft. per hour
(depending of grit)
• Rough Terrazzo rate of 2,500 sq. ft. per day
230
3 3
VARIABLE
30 60
50 80-100
385-600
®
Inc.
NO Belts
460
3
VARIABLE
30
50
385-600