Download Print this page

Terrco 01-S Series Operating Instructions Manual

Hide thumbs Also See for 01-S Series:

Advertisement

Quick Links

Terrco
, Inc.
®
01-S SERIES
OPERATING INSTRUCTIONS
MAINTENANCE INSTRUCTIONS
ILLUSTRATED PARTS LIST
®
Terrco
Inc.
222 1st Avenue NW • Watertown, SD 57201
Phone: (605) 882-3888 • Fax: (605) 882-0778
Website: www.terrco.com • Email: info@terrco.com

Advertisement

loading

Summary of Contents for Terrco 01-S Series

  • Page 1 Terrco , Inc. ® 01-S SERIES OPERATING INSTRUCTIONS MAINTENANCE INSTRUCTIONS ILLUSTRATED PARTS LIST ® Terrco Inc. 222 1st Avenue NW • Watertown, SD 57201 Phone: (605) 882-3888 • Fax: (605) 882-0778 Website: www.terrco.com • Email: info@terrco.com...
  • Page 2 PHASE DRIVE MANUAL VARIABLE MANUAL VARIABLE VARIABLE AMP DRAW BREAKER (AMPS) STONE HOLDER RPM 390-585 390-585 390-585 ® Terrco Inc. 222 1st Avenue NW • Watertown, SD 57201 Phone: (605) 882-3888 • Fax: (605) 882-0778 Website: www.terrco.com • Email: info@terrco.com...
  • Page 3 It is designed exclusively to grind and polish Terrazzo and concrete oors. Use only recommended accessories and abrasives. When the machine is in need of repair, use only Terrco approved parts. All operators must read, understand and practice the following safety precautions.
  • Page 4: Safety Label

    SAFETY LABEL The safety label is located on the drive box of the machine. Replace label if it is damaged or illegible. WARNING FOR SAFETY, READ OWNERS MANUAL BEFORE USING MACHINE ROTATING CUTTERS KEEP GUARDS IN PLACE AND ADJUSTED KEEP HANDS AND FEET AWAY WHEN OPERATING WEAR EYE AND HEARING PROTECTION WHILE OPERATING THE MACHINE GRINDING CAN GENERATE DUST...
  • Page 5 •Low voltage is a common occurrence on many terrazzo jobs, and hence it is necessary that the terrazzo contractor know his incoming voltage and amperage at the machine. •As a result of the low voltage and the use of a 230 Volt motor, Terrco® has installed a booster box with pre-wired plugs already connected to your machine.
  • Page 6 •If worn parts (bearings, gears, etc) are not replaced promptly, serious damage to your machine could occur. •Your machine will operate more effi ciently with new Terrco® parts. 2. Use only authorized Terrco® parts as our warranty will not apply if other than factory authorized Terrco® parts are used.
  • Page 7 3. Take the temperature readings. •Also, do not forget we use a thermal protected starters on Terrco® machines, and this protects the motor against low voltage and overload conditions which might raise the temperature of the motor beyond safe limits.
  • Page 8: Maintenance Chart

    01-S MAINTENANCE CHART PART # DATE CHECKED BY: AREAS OF CONCERN...
  • Page 9 01-S PARTS LIST (GEAR CASE ASSEMBLY)
  • Page 10 01-S PARTS LIST (HANDLEBAR ASSEMBLY)
  • Page 11 01-S PARTS LIST (HANDLEBAR CONTINUED)
  • Page 12 01-S PARTS LIST (SUSPENSION ASSEMBLY)
  • Page 13: Warranty Claim Procedure

    1. Contact your Terrco® Distributor giving them the following: • Model and date purchased. • Horsepower. • Accurate description of the malfunction. 2. If there is no Terrco® Distributor in your area call or write to us with the above information.
  • Page 14: Limited One-Year Warranty

    THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRATNIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OR MERCHANTABILITLY AND FITNESS FOR USE AND ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF TERRCO®, INC. AND WE NEITHER ASSUME OR AUTHORIZE ANY OTHER PERSON TO ASSUME FOR US, ANY OTH- ER LIABILITY IN CONNECTION WITH THE SALE IF THIS EQUPIMENT.