Qlightec QTG-WIZ Manual page 4

Information of wireless system
1. ROUTER(Wireless Signaling Device)
• The status information of the production equipment can be recognized by using an external contact and the status information are
transmitted to USB DONGLE or GATEWAY. ROUTER can receive control signal from USB DONGLE or GATEWAY.
• Please refer to wireless information table on the label of the product.
Wireless Signaling Device
• ROUTER Wireless information table reference
NAME
GROUP ID
NODE ID
ROUTER
CHANNEL
PAN ID
2. USB DONGLE
• USB DONGE is a wireless transmitter & receiver that is suitable for a small network with less than 32 wireless signaling devices.
• Please refer to wireless information table on the label of the product.
USB DONGLE
Model name
• Designated GROUP ID by customer. Possible to set 1 to 24 GROUPS.
• It must be set as same as receiver(USB DONGLE, GATEWAY).
• Designated NODE ID(Product ID) by customer. 32 ID's are available.
• Referring 1101, 11 represents channel number. NODE ID configuration is related to the channel number.
(recommended)
• Can select up-to 16 channels from 11 to 26. It must be configured same as receivers(GATEWAY and
USB DONGLE).
• PAN ID can be set from 0 to 65535. It is wireless network identifier as an unique customer's number and
designated by manufacturer.
4
<ROUTER Wireless information table>
NAME
GROUP ID
ROUTER NODE ID
CHANNEL
PAN ID
<USB DONGLE Wireless information table>
NAME
GROUP ID
USB
DONGLE
CHANNEL
PAN ID
QTG60L-WIZ
1
1101
11
01
WIZ32
1
11
01