Download Print this page

Yamaha ELECTONE ME-10 Manual page 3

Hide thumbs Also See for ELECTONE ME-10:

Advertisement

RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DU NOT REMOVE COVER (OR BACK).
NG USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SEE BOTTOM OF KEYBOARD ENCLOSURE
FOR GRAPHIC SYMBOL MARKING.
Explanation of Graphical Symbols
The
lightning
flash with arrowhead
symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "danger-
ous voltage" within the product's enclosure that
may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the presence
of important operating and maintenance (servic-
ing) instructions in the literature accompanying
the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING—
When using electric products, basic precautions
should always be followed, including the following:
1. Read all the instructions before using the product.
2 » To reduce the risk of injury, close supervision is necessary
when a product is used near children.
3. Do not use this product near water—for example, near a
bathtub, washbowl, kitchen sink, in a wet basement, or near a
swimming pool, or the like.
4. This product should be used only with a cart or stand that
is recommended by the manufacturer.
5. This product, either alone or in combination
with an
amplifier and headphones or speakers, may be capable of
producing sound levels that could cause permanent hearing
loss. Do not operate for a long period of time at a high volume
level or at a level that is uncomfortable. If you experience any
hearing loss or ringing in the ears, you should consult an
audiologist.
6. The product should be located so that its location or
position does not interfere with its proper ventilation.
re The product should be located away from heat sources
such as radiators, heat registers, or other products that pro-
duce heat.
8. The product should be connected to a power supply only
of the type described in the operating instructions or as
marked on the product.
9. This product may be equipped with a polarized line plug
(one blade wider than the other). This is a safety feature. If you
are unable to insert the plug into the outlet, contact an elec-
trician to replace your obsolete outlet. Do not defeat the safety
purpose of the plug.
10. The power-supply
cord of :the product should be
unplugged from the outlet when left unused for a long period
of time.
11. Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.
12. The product should be serviced by qualified service
personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
product; or
C. The product has been exposed to rain; or
D. The product does not appear to operate normally or
exhibits a marked change in performance; or
E. The
product
has
been
dropped,
or the
enclosure
damaged.
13. Do not attempt to service the product beyond that
described
in the user-maintenance
instructions. All other
servicing should be referred to qualified service personnel.
SAVE THESE INSTRUCTIONS

Advertisement

loading