Installation; Connections - Parr Instrument 4848T Operating Instructions Manual

Connections

Labeled connections are provided on the rear panel
of the controller.
4848T Reactor Controller (230V), Back Side
COOLING
ONLY
The cooling output connector is to be used only
with Company cooling
valve assemblies supplied with the appropriate
cooling power cord.
HEATING
ONLY
The heating output connector is to be used only
with Company heater
supplied with the appropriate heater power cord.
6

INSTALLATION

The motor output connector is to be used only with
Company
plied with the appropriate motor power cord.
Secure the clamp on motor cord to the controller
with the provided screw next to the motor socket
for safety purposes.
Other appropriate connectors are provided on the
rear panel of the controller.
The
Primary Temperature Module sensor input.
The
Aux Temp sensor input.
The
sure Module sensor input.
The
sensor input.
The
nication output.
solenoid
assemblies
MOTOR
motor assemblies
PRIMARY TEMP INPUT
TEMPERATURE INPUT connection is for the
PRESSURE INPUT connection is for the Pres-
RPM INPUT connection is for the RPM Module
USB and ETHERNET connection is for Commu-
sup-
connection is for the