HP -25 Owner's Handbook Manual page 30

e 26 Controlling the Display
Fixed Point Display
Decimal point
T
10-Digit Number
Fixed Point Display
Using fixed point display you can specify the number of places
to be shown after the decimal point. It is selected by pressing
[, followed by a number key to specify the number of
decimal places (0-9) to which the display is to be rounded. The
displayed number begins at the left side of the display and in-
cludes trailing zeros within the setting selected. When the calcu-
lator is turned OFF, then ON, it ''wakes up'' in fixed point no-
tation with the display rounded to two decimal places. For
example:
Press Display
(Turn the calculator
OFF, then ON.)
123.4567 123.46 Display is rounded off to
two decimal places. In-
ternally, however, the
number maintains its
original value of
123.4567.
4
mrFx7
o
[+ [IGap)
Normal FIX 2 display.