Yamaha MT-10 2020 Owner's Manual page 48

Instrument and control functions
the compression damping force and
1
thereby soften the compression damp-
ing, turn the adjusting screw in direction
2 (b).
3
4
(a)
5
6
1. Slow compression damping force
adjusting screw
7
Slow compression damping setting
Minimum (soft):
8
18 click(s) in direction (b)*
Standard:
9
12 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
10
* With the adjusting screw fully turned
in direction (a)
11
TIP

When turning a damping force ad-
12
juster in direction (a), the 0 click
position and the 1 click position
may be the same.

Although a damping force adjuster
may turn or click beyond the stated
minimum settings, such adjust-
ments are ineffective and may
damage the suspension.
WARNING
This shock absorber assembly con-
1
tains highly pressurized nitrogen
(b)
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.

Do not tamper with or attempt to
open the cylinder assembly.

Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.

Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.

Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
EWA10222
5-25
absorber assembly to a Yamaha
dealer for any service.