Yamaha GRIZZLY 700 2014 Owner's Manual page 24

EBU30531
Coolant temperature warning light "
This warning light comes on when the engine
overheats. When this occurs during operation,
stop the engine as soon as it is safe to do so and
allow it to cool down for about 10 minutes.
The electrical circuit of the warning light can be
checked by turning the key to "
4 warning light should come on for a few seconds,
and then go off.
If the warning light does not come on initially when
the key is turned to "
light remains on, have a Yamaha dealer check the
electrical circuit.
ECB00892
NOTICE
 The engine may overheat if the ATV is over-
loaded. In this case, reduce the load to spec-
ification.
 The engine may also overheat if mud or dirt
has accumulated on the radiator (i.e., after
riding in wet terrain). In this case, see page
8-19 for an explanation on how to access the
radiator.
"
" (on). The
" (on), or if the warning
 Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.
EBU30481
Engine trouble warning light "
This warning light comes on or flashes when an
electrical circuit monitoring the engine is not work-
ing correctly. When this occurs, have a Yamaha
dealer check the self-diagnosis system. (See page
4-7 for an explanation of the self-diagnosis de-
vice.)
The electrical circuit of the warning light can be
checked by turning the key to "
warning light should come on for a few seconds,
and then go off.
If the warning light does not come on initially when
the key is turned to "
light remains on, have a Yamaha dealer check the
electrical circuit.
4-3
"
" (on). The
" (on), or if the warning