Table of Contents
Advertisement
Language Settings
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers to the original language in which
the disc was recorded.
[Others] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 54). If you enter
the wrong language code, press b.
[OFF](for Disc Subtitle) : Turn off Subtitle.
Audio Settings
DRC (Dynamic Range Control)
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.
5.1 Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Use v / V to select the [5.1 Speaker Setup] option
then press B.
2. Press ENTER, and the 5.1 Speaker Setup menu
appears.
3. Use b / B to select the desired speaker.
4. Adjust options using v / V / b / B buttons.
5. Press ENTER to confirm your selection.
6. Press v / V repeatedly to return to the previous
menu screen.
Speaker selection
Select a speaker that you want to adjust.
Front Left (Front L) → Center → Front Right (Front R)
→ Rear Right (Rear R) → Rear Left (Rear L) →
SubWoofer
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press b / B to adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Distance
If you connected speakers to your SubWoofer, setting
the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time.
Press b / B to adjust the Distance of the selected
speaker. (You can't adjust SubWoofer speaker.)
Test
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (Front L) → Center → Front Right (Front R)
→ Rear Right (Rear R) → Rear Left (Rear L) →
SubWoofer
21
Advertisement
Table of Contents
