Table of Contents
Advertisement
HT963SA-DP_DDEULL_ENG_2959
2/20/08
OSD Initial language settings
Before using the unit for the first time, you have to adjust OSD initial
language
1 Turn the power on:
Appear the language list display window
2 Select the language:
3 Press:
4 To confirm press:
Initial Setting the Area Code
After factory setting ,To set the Area code you have to as below.
1 Display setup menu:
2 Select LOCK menu on the first level:
3 Move to second level:
Appears the activated Area code on the
second level.:
4 Move to thirdlevel:
5 Enter the new pass word:
6 Recheck entered new pass word:
7 Select a code for a geographic area:
After select,Rating and Passward will be
activated.(page 19)
8 To confirm press:
10:39 AM
Page 9
1 Display setup menu :
ON REMOTE
2 Select a desired option on the first level:
3 Move to second level:
POWER
4 Select a desired option on the second level:
vV b B
5 Move to third level:
ENTER
6 Change the setting:
b B
and ENTER
Adjust the settings - more you can do
Adjust the language settings
OSD – Select a language for the Setup menu and on-screen display.
ON REMOTE
SETUP
v V
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
B
B
numerical buttons
and ENTER
(0-9)
numerical buttons
(0-9)
and ENTER
vV b B
ENTER
Adjust the settings
There is displayed as "-" or other error mark on display when you
change OSD.
- Restart the unit
- Change function
- Disconnect and connect USB device.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list in
the reference chapter (see page 19). If you make a mistake before pressing
ENTER, press CLEAR
[OFF] (for Disc Subtitle): Turn off Subtitle.
ON REMOTE
SETUP
v v V V
B B
v v V V
B B
v v V V
, ENTER
9
Advertisement
Table of Contents
