Table of Contents
Advertisement
2U-1633
@
OY
VR502
VR501
iS
A a
HEAT
RUN
MODE
FUNCTION |
Heat Run Mode
1) To activate
While hold pushing AUTO
EDIT, A-B and
4
keys simultaneously, turn the unit power on. The remote control sensor
indicator will light to show that the unit is shifted in Heat Run mode,
Be sure to load the disc previously.
Press the disc holder open/close button (4 OPEN/CLOSE)
to cancel Heat Run mode.
*
This mode functions only for a disc with 21 pieces of music or more. For a disc with 20 pieces of music or lesser, please
do not use.
2) Operation
During the Heat Run mode
to shift the unit in Play mode makes the unit replays from the first music after opens the
loader once and re-closes it when finish playing the last track (comes into lead out).
Hereafter, operates open/close of loader, servo on, reading of TOC, and playing repeatedly, and repeats playing the two
traks; the first and the last ones.
3) Error Message
When
the
system
error
occurs
while
in Heat
Run mode, the following error message will display on the Track
No.
indicator and stops operation.
1.
E1
At the time of Focus Servo does not activate.
. E2
When unable to detect synchronous pattern however the disc is in rotating. (GFS does not drive.)
. E38
No synchronous pattern can be detected while in Play mode. (No GFS drives.)
E4
When TOC is unreadable in despite of servo is activated.
E5
In case of loader malfunctions. (Unable to turn on the switch.)
. ES
The inner circle switch of Pick-up does not turn off.
. £7
The inner circle switch of Pick-up does not turn on.
The number of operation up to the stop will be displayed on the minute and second portion of the indicator.
27
ae cy
1 ot t Smart
ft
oleh
ee
Xv
Bobo
fa
Advertisement
Table of Contents
