Specifications; Operation - Ego Power+ LT0300E Operator's Manual

SPECIFICATIONS

Voltage
56 V
Luminous
Flux/
600 – 3000 lm (depends on correlated
Brightness
color temperature)
(3 panels
combined)
Approximate
run time
6.5 hours at highest brightness,
(with EGO
60 hours at lowest brightness.
56V 5.0 Ah
Battery)
Warm Neutral
Correlated
White White1
color
temperature
2700 K 3300 K 3600 K 4200 K 5000 K
Weight
(without
1.85 kg
battery
pack)
DESCRIPTION
KNOW YOUR CORDLESS AREA LIGHT (Fig. A1)
1. Handle
2. Raised Ribs
3. Main LED Panel (inside)
4. Transparent Cover (Lens)
5. Peripheral LED Panel (inside)
6. Battery-release Button
7. Latch
8. USB-C Port
9. Battery Ejection Mechanism
10. Base
11. Hook
12. Tripod Mounting Hole
13. Brightness Adjustment Button
14. Color Temperature Adjustment Button
15. Power Button
16. Mode Button

OPERATION

WARNING:
Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
Natural Cool Daylight
White2 White White
56 VOLT LITHIUM-ION CORDLESS AREA LIGHT
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced.
APPLICATION
You may use this product for flood lighting and area
lighting.
ATTACHING/DETACHING THE BATTERY PACK (Fig. B)
Fully charge before first use.
To attach
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a "click".
To detach
Depress the battery-release button and pull the battery
pack out.
OPERATING THE CONTROL INTERFACE (Fig. C)
Power button
Press the power button briefly to turn the light ON.
Press the power button briefly again to turn the light OFF.
Brightness Adjustment
There are five brightness levels: 1 – 5 (600 lm – 3000 lm).
◾
Press the "+" button to increase brightness and press
the "–" button to decrease the brightness.
◾
When you turn on the light, the brightness will be the
same as the last time you used it.
Color Temperature Adjustment
You can adjust the color temperature of the light
according to your taste/needs.
◾
Press the " " button to toggle between the
following settings:
- Warm white light with a bias toward warmer tones,
- Warm white light with a bias toward cooler tones,
- Incandescent light,
- Warm yellow light
◾
When you turn on the light, the color temperature will
be the same as the last time you used it.
Mode Selection
An LED panel (or combination of LED panels) can be
turned on/off as desired.
◾
Press the "Mode" button to toggle between the
following modes:
—
LT0300E
5