Polaris General XP 1000 2024 Owner's Manual page 58

OPERATION
STOPPING THE ENGINE
1. Release the throttle pedal completely and brake to a complete stop.
2. Place the transmission in PARK.
3. Turn the key to the OFF position.
4. Slowly release the brake pedal and make sure the transmission is in PARK
before exiting the vehicle.
A rolling vehicle can cause serious injury. Always place the transmission in
BRAKING
1. Release the throttle pedal completely.
When the throttle pedal is released completely and engine speed slows to near
2. Press on the brake pedal evenly and firmly. Practice starting and stopping
(using the brakes) until you're familiar with the controls.
ALL WHEEL DRIVE/REAR DIFFERENTIAL
SYSTEM (AWD)
If your model is equipped with a lockable differential, you can choose to operate
with an open differential or a closed differential.
ENGAGING AWD
Press the top of the switch to engage All Wheel Drive (AWD). The 4X4 indicator
illuminates in the rider information center to indicate that the vehicle is in AWD.
When the AWD switch is on, the front gearcase will automatically engage any
time the rear wheels lose traction. When the rear wheels regain traction, the
front gearcase will automatically disengage. There is no limit to the length of
time the vehicle may remain in AWD.
Initially, the vehicle's electronic system will not enable the AWD until the engine
RPM is below 3100. Once enabled, the AWD remains enabled until the AWD
switch is turned off. If the switch is turned off while the front gearcase is moving,
it will not disengage until the rear wheels regain traction.
56
WARNING
PARK before stopping the engine.
NOTICE
idle, the vehicle has no engine braking.