Polaris General XP 1000 2024 Owner's Manual page 48

FEATURES AND CONTROLS
RIDER INFORMATION CENTER
q Gear Indicator
AWD Indicator
w
Service
e
Indicator
Fuel Gauge
r
Speed
t
Limitation (if
equipped)
The rider information center is located
in the instrument cluster. All segments
will light up for one second at start-up.
If the instrument cluster fails to
illuminate, a battery over-voltage may
have occurred and the instrument
cluster may have shut off to protect the
electronic speedometer. If this occurs,
your POLARIS dealer, or other qualified
person, can provide proper diagnosis.
The information center is set to display
standard units of measurement and a
12-hour clock at the factory. To change
to metric and/or a 24-hour clock hold
the mode button and cycle to the clock
menu. Use the directional arrows to
change the clock settings.
46
This indicator displays gear shifter position.
H = High Gear
L = Low Gear
N = Neutral
R = Reverse Gear
P = Park
– = Gear Signal Error (or shifter between gears)
This indicator shows whether 2X4 or AWD is active.
A flashing wrench symbol alerts the operator that the preset
service interval has been reached. Your POLARIS dealer, or
other qualified person, can provide scheduled maintenance.
See page 51 for resetting instructions.
The segments of the fuel gauge show the level of fuel in the
fuel tank. When the last segment clears, a low fuel warning is
activated. The outline of the fuel display will flash. Refuel
immediately.
This vehicle may be equipped with a maximum speed
limitation function. This would be displayed on the screen as
"LIM" followed by the speed. "LIM 30" for example.