Polaris General XP 1000 2024 Owner's Manual page 104

MAINTENANCE
Spilled oil left on engine components or in the engine area may pose a fire
hazard. Use shop rags to clean any spilled oil. If needed, use a non-flammable
solvent on the rag to aid in the cleaning process. Do not use any device such
as a pressurized water or air as this may disperse the oil onto engine
Clean seat belts with warm water. Avoid damaging seat belts:
• Do not use bleach, dye or household detergents.
• Never use lubricant on any seat belt component.
• Do not use a pressure washer to clean the seat belts.
If warning and safety labels are damaged, contact your POLARIS dealer for free
replacement.
Grease all zerk fittings (if applicable) immediately after washing. Allow the
engine to run for a while to evaporate any water that may have entered the
engine or exhaust system.
POLISHING THE VEHICLE
POLARIS recommends the use of common household aerosol furniture polish
for polishing the finish on your POLARIS vehicle. Follow the instructions on the
container.
POLISHING TIPS
• Avoid the use of automotive products, some of which can scratch the finish of
your vehicle.
• Always use clean cloths and pads for cleaning and polishing. Old or reused
cloths and pads may contain dirt particles that will scratch the finish.
102
components and could pose a fire hazard.
WARNING
WARNING