Table of Contents
Advertisement
Synchronized recording
(Remote control only)
Recording starts as soon as sound input is detected.
1
Insert an MD and select the source
(™ steps 1 to 3 on page 8).
If you have selected analog input, press [@ REC}, adjust the
recording level and press [lH].
2 Press [SYNCHRO REC].
"SYNCHRO REC' appears on the display.
3
Press [@ REC].
The unit goes to recording standby.
4
Start playing the source.
Recording starts as soon as sound is detected.
SYNGHRC:
%
To stop recording
Press [Mi].
Recording has finished when the message "UTOC Writing" disap-
To pause recording
Pause or stop the sound source and this unit pauses after 4 sec-
onds of silence. Recording resumes when the source is started
again. [11] on this unit does not work while this function is on.
This unit is paused when play ends.
Press [ml] to cancel the function.
Recording quality can be affected if a track begins with extremely
low volume or if there are almost silent parts during the track.
Do not use this function if the source you are recording contains
such tracks. (Track marks can be added with the divide function
after recording. ™ page 18.)
11
RQT5454
ST
Advertisement
Table of Contents
