Download Print this page

Advertisement

Quick Links

O W N E R ' S
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Leave bolts slightly loose until you are instructed to tighten them.
4. Tools required for assembly: Allen Wrench T1 & Wrench T2(included) , 10mm Wrench is helpful and
Phillips Screwdriver.
5. An electric screwdriver is recommended in assembly. However, please set at low torgue and use
extreme caution with an electric screwdriver because you could overtighten the hardware and strip
the screws.
6. To make assembly as easy as possible, place all parts of the table tennis table in a cleared area and
remove the packaging material. Organize all parts as per parts identifier in the assembly manual.
Do not dispose of the packing material until assembly is completed.
7. Avoid scratching table tennis top and metal tube parts during the assembly process.
8. Assemble product on a clean, level and flat surface.
9. Take time to correctly orientate parts exactly as per each assembly diagram.
10. Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
CAUTION:
Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as
Manufacturing defects or missing parts. However, if you have any problems with your new product, please DO NOT RETURN IT
TO THE STORE!
Please Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
R
Phone: 1-800-467-1421
Fax:
1-866-873-3533
E-mail: tabletennis@escaladesports.com
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be found on the
product, packaging, and/or in this Owner's Manual.
Please visit our website at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING
ON-LINE PARTS REQUESTS
ADDITIONAL ESCALADE SPORTS PRODUCT INFORMANTION
Escalade Sport products may be manufactured and/or licensed under the following patents.
R
6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS
CAREFULLY! AT LEAST TWO ADULTS ARE NEEDED TO PUT
THIS TABLE TOGETHER!
Toll-Free!
Mailing Address
Toll-Free!
(correspondence only):
Escalade Sports
PO Box 889, Evansville, IN 47706
TECHNICAL ASSISTANCE
FREQUENTLY ASKED QUESTIONS
R
Be sure to write your model number and serial number
here for future reference. You can find these numbers
printed on the bottom of the table.
MODEL NO.: T8631F
DATE CODE : CPSIA#2-T8631F-____-SY
PURCHASE DATE : _____________________
M A N U A L
Physical Location:
Escalade Sports
817 Maxwell Ave.
Evansville, IN 47711
2023 Escalade Sports
R
C

Advertisement

loading
Need help?

Need help?

Do you have a question about the Stiga T8631F and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ESCALADE Stiga T8631F

  • Page 1 ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS ADDITIONAL ESCALADE SPORTS PRODUCT INFORMANTION Escalade Sport products may be manufactured and/or licensed under the following patents. 6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563 2023 Escalade Sports...
  • Page 2 HARDWARE IDENTIFIER (To Scale) H1 - 6mm x 60mm H2 - 6mm x 18mm H3 - 6mm Allen Head Bolt Flat Washer Lock Nut (8 pcs) (36 pcs) (18 pcs) H4 - 6mm x 55mm H5 - 6mm x 45mm H6 - 5mm x 13mm Allen Head Bolt Allen Head Bolt...
  • Page 3 PARTS IDENTIFIER (Not to Scale) - 3 -...
  • Page 4: Important Note

    IMPORTANT NOTE: Table halves must be laid on a clean flat surface for correct assembly and to prevent any scratches or blemishes to playing surface. As bottom of table halves have many predrilled pilot holes - please make sure to match all parts to the correct pilot holes.
  • Page 5 PARTS REQUIRED 8 pcs - H4 6mm x 55mm 16 pcs - H2 Flat Washer 2 pcs - P7 Linkage Tube with Stop Bracket Allen Head Bolt 8 pcs - H7 Plastic Spacer 2 pcs - P8 Linkage Tube 8 pcs - H3 Lock Nut 1 pc - T1 Allen Wrench 1 pc - T2 Wrench...
  • Page 6 PARTS REQUIRED 4 pcs - H1 Allen Head Bolt 4 pcs - P5 Caster without Lock 8 pcs - H2 Flat Washer 2 pcs - P3 Plastic Leg Panel with Frame 4 pcs - H3 Lock Nut STEP 3: Insert two pieces P5 Casters into each C4 Caster Socket as shown in FIGURE 3. Caster must “snap” down into Caster Socket. Repeat procedure for the other table half assembly.
  • Page 7 WARNING: THIS STEP REQUIRES THREE OR MORE ADULTS. VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY. PARTS REQUIRED 4 pcs - H1 Allen Head Bolt 8 pcs - H2 Flat Washer 4 pcs - H3 Lock Nut STEP 4: Make sure the legs on one table top half (the half with P3 Plastic Leg Panel attached) are open.
  • Page 8 CAUTION: INSTALL P6 - SAFETY LATCHES AS SHOWN FOR PROPER USE OF TABLE! DO NOT SKIP THIS STEP! DO NOT OPERATE TABLE UNTIL SAFETY LATCHES ARE INSTALLED AND ASSEMBLY IS COMPLETE! PARTS REQUIRED 2 pcs - H5 Allen Head Bolt 2 pcs - H8 Shoulder Washer 1 pc - P10 Net Post 4 pcs - H2 Flat Washer...
  • Page 9 OPENING AND CLOSING INSTRUCTIONS CAUTION: READ OPERATING INSTRUCTIONS CAREFULLY BEFORE OPERATING TABLE! DO NOT ALLOW CHILDREN TO OPEN TABLE! DO NOT CLIMB, STAND OR JUMP ON TABLE! SERIOUS OR FATAL INJURY MAY RESULT! THIS IS NOT A TOY! TABLE IS TO BE OPENED OR CLOSED BY ADULTS ONLY! FAILURE TO COMPLY WITH OPENING AND CLOSING INSTRUCTIONS COULD RESULT IN PERSONAL INJURY OR PROPER DAMAGE.
  • Page 10: Care And Maintenance

    CARE AND MAINTENANCE You have purchased a quality product that will give you years of enjoyment. By following these simple maintenance steps, you will add to the life of your new table. THE TABLE TOP The top (playing surface) of your table is made of Mid-Density Board. . Like all products made of wood, it can be affected by atmospheric changes in both temperature and humidity.
  • Page 11: 90-Day Limited Warranty

    Other than shipping requirements no charge will be made for such repair or replacement of in-warranty Produts. ESCALADE SPORTS strongly recommends that the Product is insured for value prior to mailing. WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE ABOVE NINETY (90) DAY WARRANTY PERIOD.