MSI PRO MP161 E2 Manual page 18

Environment
To reduce the injury caused by heat or overheating possibility of the device, do not place the

device on a soft and unstable surface or block the ventilation holes of the device.
Use this device only on a hard, flat and stable surface.

To prevent the device from tipping over, use an anti-tipping fixture to secure the device to the

table, wall or fixed object so that the device is supported properly and it is ensured to be
safely in place.
Keep the device away from any damp and high temperature places to avoid fire and electric

shock.
Do not place the device in a poor environment where the storage temperature is higher than

60 ℃ or lower than - 20 ℃, otherwise the device may be damaged.
The maximum working temperature is about 40 ℃.

For cleaning the device, be sure to take off the power plug. Use soft cloth to clean the device,

do not use industrial chemical detergent. Do not pour any liquid into the opening of the
device to avoid damaging the device or causing electric shock.
Keep the device away from any object with strong magnetism or strong electricity.

In case of any of the following situations, please contact the service personnel to repair the

device:
·The power cable or plug is damaged.
·Liquid enters the device.
·The device gets damp.
·The device does not work properly or cannot be used normally in accordance with the
instructions in the user guide.
·The device falls off and is damaged.
·The device is obviously damaged.
18