Onview Main Menu, Part 2 - ViewSonic Optiquest PF775 User Manual

To exit the OnView

OnView Main Menu, part 2

VIEWMETER
and refresh rate) coming from the graphics card in your computer.
H. CONVERGENCE
color alignment. Use only if you see red or blue around the horizontal
segments of black letters on a white background. Press [M] or [L] to
adjust.
V. CONVERGENCE
alignment. Use only if you see red or blue around the vertical
segments of black letters on a white background. Press [M] or [L] to
adjust.
V. LINEARITY CENTER
distortion at the center of the screen image. Press [M] or [L] to adjust.
V. LINEARITY SYMMETRY
vertical distortion by balancing the vertical distortion between the top
and the bottom of the screen image. Press [M] or [L] to adjust.
NOTE: Both V. LINEARITY CENTER and V. LINEARITY SYMMETRY are advanced
controls to be used for set up and calibration only. To return these controls to
factory settings use DATA RECALL (see page 11).
straightens the four corners of the screen image. Press [M]
HOOKING
or [L] to adjust.
adjusts the sharpness of the screen image. Press [M] or [L] to
FOCUS
adjust.
ViewSonic PF775
® menu or screen & save changes, press button [1].
®
displays the frequency signal input (horizontal scan
(Horizontal Convergence) adjusts horizontal
(Vertical Convergence) adjusts vertical color
(Vertical Linearity Center) adjusts the vertical
(Vertical Linearity Symmetry) adjusts the
E
N
G
L
I
S
H
Operation 9