Shifter Paddles Adjustment - Cube Controls GT-X2 User Manual

1.3 Shifter Paddles Adjustment

Shifter paddles can be easily adjusted to better suit your hand size and driving preferences.
NOTE: TX10 drive needed.
All steering wheel screws are tightened with a tightening torque of 3.5 Nm, except for the two
screws indicated in red, tightened with a tightening torque of 4 Nm. Length can be adjusted
by slightly loosening the two screws highlighted in the right picture, and sliding forward/
backwards the carbon paddle.
Reach can be adjusted by slightly loosening the two screws highlighted in the right picture
and the two on the opposite side of the shifter as pointed by the small arrows, then rotating the
lever body upwards/downwards. You may need to apply a bit of force.
Caution: do not use a tightening torque higher than 4 Nm to avoid any damage to the screws or
the paddles' carbon body.