Figure 7 - Flame Simulator Kit; Figure 8 - Fls-Fsim-Ir3-H2 Flame Simulator Front View - FGD FlameSpec IR3-H2 User Manual

FlameSpec IR3-H2 User Manual
1.5.5 Flame Simulator
The FLS-IR3-H2 may be tested using the FLS-FSIM-
IR3-H2-KIT. The FlameSpec flame simulator family
provides a fast and convenient means of
periodically testing the detector and control system
end-to-end. Maintenance costs can be reduced as
the detectors can be tested in situ without needing
a hot work permit.
FlameSpec Flame Simulators emit IR radiation in a
special electromagnetic radiation pattern which
simulates a hydrogen fire to the detectors. The
simulators are lightweight, easy to use, with testing
distances of up to 23 ft. (7m) and capable of more
than 1000 activations between battery charging.
FlameSpec Flame Simulators are ATEX approved for
use in hazardous Zone 1, Zone 2, Zone 11, Zone 22
areas.
Each simulator kit contains a carrying case,
simulator, carrying strap, battery charger, user
manual, Allen key and a tool for removing the
simulator rear cover.
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com
F150V0020.09
F 7 - F S
IGURE LAME IMULATOR
F 8 - FLS-FSIM-IR3-H2 F
IGURE
V
K
IT
S F
LAME IMULATOR RONT
IEW
6