Download Print this page

Stacking And Mounting - SciQuip Incu-Shake Compact User Manual

Hide thumbs Also See for Incu-Shake Compact:

Table of Contents

STACKING AND MOUNTING

4.1 Using a forklift or manually lift to raise the bottom

4.2 With two assistants guiding the shaker from opposite sides, lower the unit onto the

bottom unit, rear end first.

4.3 Manually adjust the position of the top unit, and make sure the holes of the top unit aligns

with the mounting holes of top of the bottom unit.

4.4 Install the (4) inner socket head bolts onto the top unit, and fasten the both units together.

4.5 Install cover plates back in place, fasten the Phillip screws and the stacking is finished.

Incu-Shake Compact

(without base)

Table of Contents

Do you have a question about the Incu-Shake Compact and is the answer not in the manual?