Sony BRAVIA KDL-19M4000 Operating Instructions Manual page 36

Lcd digital color tv
Hide thumbs Also See for BRAVIA KDL-19M4000:
Table of Contents

Advertisement

Other Information
No sound/Noisy
sound
Good picture, no sound.
Audio noise.
Wide Mode changes automatically.
"Black
box" on screen.
Black bands appear
at the top and
FI
bottom
of the screen.
Certain
programs
on DVD or other
FI
digital sources
display
a loss of
detail, especially
during
fast-motion
or dark scenes.
Remote control does not operate.
FI
Some digital cable channels
are not
FI
being displayed.
rq
Lost password.
How to reset the TV to factory
settings.
Check the volume control.
Press MUTING or VOL + so that "Muting" disappears fl'om the screen
(page 20).
Disconnect your headphones.
CI
Set Speaker to On in the Sound settings (page 26). If it is set to Off, sound is
not output from the TV's speakers regardless of the TV's volume control.
Make sure that the antenna is connected tlsiug the 75-olnn coaxial cable (not
supplied).
Keep the antennacable away from other connecting cords.
To avoid TV interference, make sure to use an undamaged autelma cable.
The current Wide Mode setting is automatically replaced with the 4:3 Default
setting when yon change the channel or vide<)input, if 4:3 Delault in the Screen
settings is set to other than Off. If you want to lock in the Wide Mode selected
with the WIDE button, set 4:3 Default to Off in the Screen settings (page 27).
Check the Auto Wide option in the Screen settings (page 27).
You have selected a text option in the Setup setting and no text is available. (See
pages 33 and 34 to reset Setup selections.) To mrn off this feature, set the
Closed Captions (CC) nption to Off. If you were trying to select closed
captioniug, select CCl instead of Text1-4.
Some wide screen programs are fihned in aspect ratios that are greater than 16:9
(this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of the screen. For mnre details,
check the documentation that came with your DVD (or contact your program
provider).
The compression used by certain digital broadcasts and DVDs may cause your
TV's screen to display less detail than usual, or cause artifacts (small blocks or
dots, pixelatious) to appear on your screen. This is due to your TV's large screen
and ability to show very fine detail, and is normal lot certain digitally recorded
programs.
Check the polarity of the batteries or replace the batteries.
Point the remote control at the remote control sensor of the TV.
Fluorescent lamps can interlere with your remote control operation; try turning
off the fluorescent lamps.
Keep the remote control sensor area clear from obstacles.
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company l\_r mnre iuh)rmatiou.
The digital cable channel may be set to Hidden in the Show/Hide Channels
setting (see page 29).
Select the Parental Lock settings on the settings screen, then enter flaefollowing
master password: 4357. The master password clears your previous password and
allows you to enter a new password (page 31).
Turn on the TV. While holding down the t1"button on the remote control, press
and hold down the MENU button on the TV until "reset" appears nn the bottom
left corner of the screen. (The TV will turn itself off, then back on again.)
Release the t1"button.
WARNING: The Reset will clear all of your customized settings including
Parental Look
setting.
36

Advertisement

Table of Contents
loading

Table of Contents