Table of Contents
Advertisement
Rapid Spray Fire Marshal Operators Handbook
KAWASHIMA FIRE PUMP CONT.
WATER HOSE INSTALLATION CONT.
Connect the strainer on the inlet hose end.
3.
Submerge the suction hose strainer in the water
4.
Remove self-suction plug and top up the pump with water. Make sure the water is at
5.
pump casing upper level. Add water as necessary
WARNING! Be sure that the pump is filled up with water before starting the engine, else
mechanical seal damage will occur.
AYH013
WARNING! Be sure the strainer is installed or
pump damage will occur.
NOTE. Discharge port angle can be changed
to 3 different directions. Adjust to your
operating condition.
UPPER LEVEL
13
JUN 2023
Advertisement
Table of Contents
