Vcr Plus+ System Programming - Panasonic OmniVision PV-C2020 Operating Instructions Manual

VCR Plus+ System Programming
Process of Recording
Connection c=> Setup ■ = £> Programming
SET PROGRAM
I VCR Plus* PROGRAMING
TIMER PROGRAMMING
ON TIMER
SELECT:
A Y
KEY
SET :► KEY
END : PROG KEY
V. _
Display PROGRAM
screen.
Press PROG/VCR+.
Select VCR Plus+ PROGRAM.
1) Press
AW
to
select.
2) Press ► to
display.
VCR Plus+ SYSTEM
ENTER PLUSCODE NUMBER
USING 0-9 KEYS
END : PROG KEY
To Make Corrections
Enter PlusCode
programming number.
1) Press
NUMBERED
keys.
2) Press
PROG/VCR+
when finished.
CD CD CD
CD CD CD
CD CD CD
CD
Press ◄ repeatedly to delete the PlusCode programming number.
VCR Plus+ SYSTEM
ONCE
DA I LY (MON-FR I)
WEEKLY
SELECT
:A y
KEY
SET :► KEY
END :PROG KEY
Set Record Frequency.
1) Press
AW
to
select.
2) Press ► to set.
fDATE START STOP Ch]
28 TUE 12:OOP 12:3QP 69
\I/ PBS
CATEGORY: N/A SP
-/H-V..
[SELECT CATEGORY
SELECT:
A y
KEY
SET
:<
► KEY
END :PROG/ACTION KEY
Set Category and
Record speed.
• If wanted, make a note (see page 14.)
1) Press
AW
to
select.
2) Press ► to set.
Select desired type: 1-1
• Categories -» N/A (not applicable), SPORTS, MOVIE, COMEDY
MUSIC, or DRAMA
• Speed -* SP, LP, or SLP
To Make Corrections
Press ◄ ► to move the cursor and
AW
to make the correction.
O'.
Check list before you begin.
□ The clock is set to correct time.
□ VCR Plus+ System Setup is complete.
(See pages 17, 18.)
Use normal Timer Recording steps if:
• a program PlusCode programming
number is not listed.
• program, such as a sporting event, may
run over scheduled stop time.
See page 15 to:
• cancel a timer recording in progress.
• replace program contents.
• review or clear program contents once set.
P DT STARTSTOP CH SPo]
[i 28 12:00p 12 : 30p 69 SP|
3 -;-: — __
4 -;-— -
CANCEL:ADD/DLT KEY
SELECT 1-8:
a y
KEY
ENTER :► KEY
END :PROG/ACT ION KEY
End programming.
Press
PROG/VCR+
(or ACTION.)
Exit this mode.
Press PROG/VCR+
(or ACTION) twice.
• PROG TIMER indicator lights on
the unit.
• You can obtain unlisted PlusCode
programming numbers by calling 1-900-
454-7587. Call costs approximately $.95
per minute.
• Avoid overlapping program times.
• If you're using a cable box. make sure
that it is turned to the desired channel
and the power is left on for timer
recording.
• Timer programs memory capacity is 8.
To add more programs, please first clear
other programs. (See page 15.)
19