ReverseTap In-counter Models Installation Guide ( Kegerator )
3. Put ReverseTap on the desired surface.
- Silicone is wrapped around the bottom borders of the dispenser for sealing purpose.
Please be careful not to have it escape.
4. Connect DC 24 V CONNECTOR CABLE with the main power cable of ReverseTap.
① The end part of DC 24 V CONNECTOR CABLE is a waterproof connector.
② DC plug of DC 24 V CONNECTOR CABLE is not waterproof, therefore keep it away from water and tape
around the joint part.
*DC 24 V CONNECTOR CABLE
②
*Silicone for sealing
* Organize the cables after connecting DC 24 V CONNECTOR CABLE with ReverseTap.
V2.0