Advertisement
ReverseTap Countertop Models Installation Guide ( Kegerator )
5. Connect beverage tubing to the flow sensor and the other end of beer line with a coupler.
① Flow sensor has fitting assembled already for 1/4 inch beer line.
( The inlet of flow sensor is 5/16 inch )
② For beer use : Approximately 3m long 1/4 inch(O.D) beer line must be used.
( Wind up a beer line several times and finish with taping for organizing )
6. Connect the Drain hose set.
- Be careful not to bend drain hose too much, and organize for the easy drain.
- Connect the end of the drain hose to the sewers or a drain bucket.
5/16 inch
V2.0
Advertisement
