Advertisement
AV-32WP2EN
AV-32WP2EP
Adjustment
of
4.H-CENT.
16. Receive a circle pattern signal.
17.Select 4.H-CENT and set the initial setting value.
18. Adjust H-CENT to make C=D.
19.Press the MENU key and memorize the set value.
Adjustment
20. Receive a cross-hatch signal.
of
21.Select 5.H-SIZE and set the initial setting value.
H.SIZE
22. Adjust H-SIZE and make sure that the horizontal screen size
of the picture size is in the bellow table.
23.Press the MENU key and memorize the set value.
24. Input a NTSC VIDEO signal from the EXT terminal, and make
sure that the horizoutal screen size of the PANORAMIC mode
is in the table below.
25.Press the MENU key and memorize the set value.
ASPECT
16:9 ZOOM
MODE
PANORAMIC | SUB TITLE
[ SCREEN SIZE ]
26. Select 6.EW-PIN and set the initial setting value
27.Adjust EW-PIN and make the 2nd.vertical lines at the left and
right edges of the screen straight. Also make sure that the 3rd
vertical lines are straight.
28.Press the MENU key and memorize the set value.
Straight
No.51237
27
Advertisement
