Sony Handycam CCD-FX420 Operation Manual page 28

(Or-lualclesMaiciee)aellare
NW Ni B
Press the small green button and slide (| i
the POWER switch to CAMERA. [CAMERA/OFF\PLAYER
Set the STANDBY switch up.
While looking in the viewfinder, keep
pressing the + or — side of EDITSEARCH
and release the button where you want to
end the insertion.
The camcorder enters the standby mode again.
Press COUNTER RESET.
The counter is reset to zero.
While looking in the viewfinder, keep
pressing the — side of EDITSEARCH and
release the button at the point where you
want to start the insertion.
+ EDITSEARCH-G)
Press ZERO MEM.
The insert ending point is stored in memory.
Press START/STOP.
Insert recording begins. The insert recording
stops automatically at the counter zero point.
To cancel the ZERO MEM
Press ZERO MEM.
28 Advanced Camera Operation