Working principle It acts on the human body through the electricity pulse wave, the electric energy is sucked by the human body and the energy form is changed, which causes a series of physical and chemical changes, produces local or systemic physiological reactions, and finally affects the pathological process and plays a corresponding role.
STEP 1: Connect the electrode pads to the electrode wires Note: Please check the snap connections to ensure they are fastened. Use at least one pair of pads, one pad can ’t work alone. STEP 2: Plug the wires into the device Note: Please make sure the wires are fully inserted to the end.
Page 11
STEP 6: Choose the mode and adjust the intensity of CH1/CH2/CH3/CH4 1. Press the “<” or “>” key to select one main mode from 6 round main modes, and press the “M” key to select one mode inside the circle you want to use. The selected mode and number will flash.
Need help?
Do you have a question about the FM-B2402 and is the answer not in the manual?
Questions and answers