Table of Contents
Advertisement
Keep clear of moving parts.
watches, long hair, and other loose or hanging items can
become entangled in moving parts.
Wear protective equipment when appropriate.
DO NOT attempt to remove material from any part of the
machine while it is being operated or components are in
motion.
Make sure all guards and shields are in good condition
and properly installed before operating the machine.
Never operate the machine with shields removed. Al-
ways close access doors or panels before operating the
machine.
Dirty or slippery steps, ladders, walkways, and platforms
can cause falls. Make sure these surfaces remain clean
and clear of debris.
A person or pet within the operating area of a machine can
be struck or crushed by the machine or its equipment. DO
NOT allow anyone to enter the work area.
2 - SAFETY INFORMATION
Loose clothing, jewelry,
Raised equipment and/or loads can fall unexpectedly and
crush persons underneath. Never allow anyone to enter
the area underneath raised equipment during operation.
Never operate engine in enclosed spaces as harmful ex-
haust gases may build up.
Before starting the machine, be sure that all controls are
in neutral or park lock position.
Start the engine only from the operator's seat. If the
safety start switch is bypassed, the engine can start with
the transmission in gear. Do not connect or short across
terminals on the starter solenoid. Attach jumper cables
as described in the manual. Starting in gear may cause
death or serious injury.
Always keep windows, mirrors, all lighting, and Slow Mov-
ing Vehicle (SMV) emblem clean to provide the best pos-
sible visibility while operating the machine.
Operate controls only when seated in the operator's seat,
except for those controls expressly intended for use from
other locations.
2-5
Advertisement
Table of Contents
