Advertisement
Do not Be Alarmed If...
1. The Electone does not operate when the power switch
is turned on; check the following:
è
Is the plug fully inserted
into an AC outlet (the same as you use for a lamp, etc.)? Reinsert it to be
sure.
i
è
|s there power
coming from that outlet?
Unplug the Electone and plug in a lamp; then see if the
lamp will light.
If it does not, the problem is probably in your home's electrical system.
Check your
fuses or circuit breakers.
*
|f you find that there is power
in the outlet, but the Electone does not play, unplug the cord and
call your nearest Yamaha
dealer.
There are NO USER-SERVICEABLE
PARTS
in the Electone.
2. A note should sound the instant you turn on the switch.
This merely
indicates norma! operation
consequent to a surge of electricity in the main amplifier.
4. Occasional
unpleasant static occurs.
In the majority of such cases, the cause can be traced to the turning on or off of refrigerators, washing
machines, electric pumps or other household appliances.
Electrical fault in a neighboring outdoor neon
sign may also be to blame.
When the cause is a home appliance, connect the Electone to an outlet as far as possible away from the
offending appliance.
This phenomenon,
although annoying, poses no danger to the Electone circuitry.
If the cause is a fault in a neon or fluorescent
lighting fixture, it should be repaired.
When the cause
is unknown,
or
in case
of doubt,
contact
your
Yamaha
dealer.
-12-
Advertisement
