Inalto IMC28BF User Manual page 7

07
ELECTRICAL CONNECTION
The oven is fitted with a plug and must only be connected
to a properly installed earthed socket. The socket must
only be installed and the connecting cable must only be
replaced by a qualified electrician, and in accordance
with the appropriate regulations. If the plug is no longer
accessible following installation, an all-pole isolating
switch must be present on the installation side with a
contact gap of at least 3mm.
The fitted cabinet must not have a back wall behind the
appliance. A gap must be maintained between the wall
and the base of the unit above. Specific gap size could be
referenced by the diagrams.
Minimum installation height: 85cm.
Do not cover ventilation slots and suction holes.
Note: Do not trap or bend the power cable.
Screws
Mounting Bracket
User Manual
IMC28BF