Section 6: Simultaneous Calls; Initiating A Second Call; Switching Between Channels While Two Calls Are Active; Reverting To First Call After Initiating But Not Completing A Second Call - Flightcell SVS Operator's Manual

Section 6: Simultaneous Calls

SVS installations with two communications channels can manage simultaneous calls on the two
channels.
In itiat ing a second ca ll
When a communications channel is in a call a second call can be initiated on the other (unused)
channel as follows:
Key Function
Change to last base screen from where a second call can be initiated
via one of the dialling screens.
MODE long press
Note: while in these screens the first communications channel status
field will show 'IN CALL' to indicate it is still in a call.
Swit ching between channels wh ile two ca lls are active
When two communications channels are in a call simultaneously the operator can switch between
call screens as follows:
Key Function
MODE long press Toggle between active call screens
Revert ing to f irst ca ll after in itiat ing but not comp leting a se cond ca ll
When the operator has changed to a base screen to initiate a second call, but the second call has
not been completed, the operator can go back to first call as follows:
Key Function
MODE long press Change back to active call screen
117-00003 Flightcell SVS Operator Manual Rev 1.2 Effective date 21 September 2022 Page 36