User Interface Lists - Flightcell SVS Operator's Manual

Popup screen priorities
The popup screen priority is shown in the table below.
The call screens are specific to the currently selected communications channel and can be toggled
between the primary and secondary channels to switch between call contexts.
Popup display priorities
(highest to lowest)
Error/Warnings
Selected
Communications
Channel Call Screens
System Information
User Interface L ist s
The SVS uses lists to facilitate browsing and selecting and executing items in phonebooks and
menus.
Lists are displayed in the main screen region.
Up and down keys are used to navigate through the list items with the list wrapping at the top and
the bottom.
The selected list item is highlighted and indented, while non-selected list items are greyed out. The
selected item can be executed with a function specific to the list.
If the list contains more items than will fit on one screen a scroll indicator is displayed showing the
relative length of the list and the selected position through the list.
On exiting the list the selected item is stored, then restored on returning to the list, and cleared
when the SVS is powered off.
117-00003 Flightcell SVS Operator Manual Rev 1.2 Effective date 21 September 2022
Popup screen
Error/Warning
Selected communications channel in call
Selected communications channel incoming
call
Selected communications channel dialling
Contact details
Safety voice priority select
Active errors list
Primary channel diagnostics
Secondary channel diagnostics
Discrete input diagnostics
System information diagnostics
Page 14