Base And Popup Screen Types - Flightcell SVS Operator's Manual

Error/warnings icon
An Error/Warnings icon is displayed in the top left region of the display when an error or warning is
present, see Errors/Warnings Screens for details.
Common screen keypress functions
Key
MODE
long press
POWER
long press

Base and Popup Screen Types

The SVS has two types of screens:
»
'Base' screens of which only one can be active at a time, including:
»
Home screen (a user interface 'hub')
»
Screens to initiate calls.
»
A menu screen to access information and diagnostics screens.
»
An EMCON screen which is displayed when the SVS is disabled.
»
'Popup' screens, which are non-persistent screens that pop up over the base screen and
are used for:
»
Managing calls in progress
»
Displaying system errors and warnings
»
Displaying general information
Multiple popup screens may be active at any one time, in which case a prioritisation scheme
determines which to display on top.
Popup screens can be cleared by the operator.
The SVS starts in the home screen at power up and changes to other screens based on events
(e.g. incoming calls) and user actions (e.g. key presses) as summarised in the following screen
map:
117-00003 Flightcell SVS Operator Manual Rev 1.2 Effective date 21 September 2022
Function
Toggle communications channel selection
(when SVS is configured with two channels)
Power on or off the SVS
Page 12