Table of Contents
Advertisement
Setting the Print Quantity
This camera allows you to set the print quantities for a print to
between 0 and 9. This means you can increase the number of
prints without havittg to wait for the iUm to be processed, and
also allows to avoid printing pictures that were taken by
accident. Please note that the print quanfity setting or changes
to the setting only apfdy to the next frame to be shot or to the
previous shot.
• The print quantity display is automatically set to 1 print
(P-1) when negative film is loaded.
• When slide film is losded, the print quantity display Is
automatically set to no print (P-0).
Setting the Print Quantity for the Next Shot
1
Press the
print
quantity button.
• Use the push-buRon
projection on the strap to
pu^ Ihe button.
• "P-r(1 print) appears in
the LCD panel
P • 1
mn
fifed)
r-1-—
H
2
Press the fl button until
the number of prints you
want to set for the next
shot appears In the LCD
panel.
*The print quantity display
changes as follows: P-1,
P-2... P-9, P-0, P-1.
3
Take the picture.
•e After the shot has been
taken, the print quantity
setting Is canceled and
the normal single print
setting Is resumed.
11-52
Advertisement
Table of Contents
