Panasonic KX-P1150 Operating Instructions Manual page 29

sing the Control! Pane
Resetting All Current Settings to the Factory Settings
Follow the instructions below:
If there is paper loaded, you will automatically get a printout of the current settings.
1 While pressing ; LOAD/PARK , turn the
power on, then release.
Make sure that both FONT indicators are
blinking.
==
A,
ON LINE
IE FONT = ON LINE
POWER
' PAPER QUT
FONT indicators
x
2 Press( TEAROFF .
All the current settings will be reset to the
Factory settings.
NLINE | E- TER LF/FF
3 Press /LOAD/PARK .
A printout will verify the current settings.
You have exited the Initial Setup Mode.
N
(6
Le
A 4
apo dnie jeni