Auto Configuration; Requriements - Bicom Systems Aastra 9112i How-To

6. Click on the "Restart" button to restart Aastra 9112i so the changes take effect.
2.4

Auto Configuration

- Requirements
- Auto Configuration
2.4.1

Requriements

1. Make sure your devices are properly connected to the same
2. Make sure that all devices are set to Factory Defaults.
3. Make sure that all devices are using port 5060.
2.4.2 Auto Configuration
1. Navigate to "Extensions: Find Phones".
2. A pop up window will appear. Input range of IP addresses
Example:
- Start IP: 192.168.1.2
- End IP: 192.168.1.254
3. Click on the "Start" button. The PBXware will search for devices connected to the
same LAN
(c) 2003-2010 Bicom Systems
in selected range of IP addresses.
Registering Aastra 9112i
LAN as your PBXware.
24