Control 4 C4-FP C Series Installation Manual

Faceplate Installation Guide
For C4-FPx-C-x, C4-V-FPx-C-x, C4-FP2-COMBO-x faceplates
WARNING! Turn off local electrical power to avoid SERIOUS INJURY or DEATH before
installing, removing, or replacing the faceplate.
Installation
• The faceplate and subplate ship snapped together. Separate them with your fingers.
• Loosen the screws attaching the devices to the wall box.
• Use the screws provided to tightly secure the subplate to all devices, ensuring proper alignment
of all devices.
• Lightly tighten the assembly to the wall box, securing all device screws.
Caution:
To maintain a flat surface for faceplate installation, do not over-tighten.
• Snap the faceplate onto the subplate.
• Press firmly around the outside edges of the faceplate to ensure a tight fit.
Removal
• To remove the faceplate, gently pull with your
fingertips from the top or bottom edge.