Victory FA-1D-S7 Characteristics

FS MODELS — FS-1D-S7
FS-2D-S7
Stainless steel
FS-3D-S7
exterior and
interior.
Half Door, Pass-T T hru and Remote Models Available
Cabinet:
The cabinet front and doors are constructed
of heavy gauge polished stainless steel to
maintain an attractive appearance for years
of heavy use. Foamed-in-place polyurethane
insulation throughout the cabinet and doors
ensures the ultimate in energy efficiency.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges, which have a
lifetime guarantee. Each door has a heavy-
duty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material,
which resists denting and scratching and is
easy to clean. Each safety grip handle is
Approvals:
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Storage Freezers
FSA MODELS —
Stainless steel
exterior.
Aluminum interior.
FS-2 2 D-S S 7
guaranteed for life. Interior lighting is
controlled automatically by a switch mounted
in the hinge.
Shelving:
The heavy-duty wire shelves are adjustable
in one-inch increments. A wide door opening
allows the use of a variety of optional pan
slide types for 12" x 20", 18" x 26", and 14"
x 18" pans and trays.

Refrigeration System:

All components of the self-contained
refrigeration system are mounted on top of
the cabinet. The air circulating fans and the
forced convection cooling coil are contained
in an insulated housing separate from the
product zone allowing for maximum food
storage capacity. All condensate water is
disposed of automatically by the energy
efficient non-electric condensate evaporator,
no plumbing is required.
Project:
Location:
Item #:
Quantity:
FSA-1D-S7 FA MODELS —
FSA-2D-S7
Stainless steel fronts
FSA-3D-S7
and doors. Aluminum
sides and interior.
FS and FSA Models
• Digital Thermometer/Battery Back-up
• Adjustable Stainless Steel Legs
FA Models
• Dial Thermometer
• Adjustable Legs
Standard Features (all models)
• Energy Saver Switch
• Stainless Steel Case Front and Door(s)
• Heavy-Duty Lifetime Cam Lift Hinges
• Adjustable Wire Shelves
• Lifetime Safety Grip Handle(s)
• Self-Closing Doors with Safety Stops
• Flush Mounted Automatic Interior Lighting
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts 12" x 20" and
18" x 26" Pans
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-404A Refrigerant
• Non-Electric Condensate Evaporator
• Automatic Defrost
• Cord and Plug Attached on 115V Models 12
Amps or Less
Optional Features and Accessories
• Dial or Digital Thermometer
• Two Half Doors in Place of One Full Length
Door
• Full and Half Size Hinged Glass Doors with
Cylinder Locks
• Change Door Swing
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• 5" Diameter Heavy-Duty Swivel Casters with
Brakes
• Stainless Steel Case Back
• Fluorescent Lights
• Remote and Pass-Thru Models
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
FA-1D-S7
FA-2D-S7
FA-3D-S7