HOMCOM 800-172V70 Instruction Manual page 4

Ready indicator light:
The light turns on and off, indicating the
thermostat is cycling on and off. This is to
maintain the correct temperature of the oil.
Timer control knob:
Set between 0-60
minutes.
1. Always place the deep fryer on a stable surface. Keep all flammable materials away
from the unit during operation.
2. Keep this appliance away from stoves and cooking surfaces.
3. Before use, ensure the deep fryer is filled with the required amount of oil or fat. Never
use the deep fryer without oil or fat – this could damage the unit.
4. Never move the deep fryer during use. The oil becomes very hot. Wait until the unit
and oil have completely cooled down before moving.
5. This deep fryer is protected with a thermal safety device, which switches the machine
off automatically if it overheats.
6. Never immerse the appliance in water.
7. Never leave the deep fryer unattended while in use.
8. Always ensure the safety of children if they are near the deep fryer.
9. If the deep fryer and/or cord are damaged, they must be repaired by a professional
service department. Do not try to repair the unit yourself or replace the damaged cord.
This requires special tools.
10. Be sure not to damage the heating element (do not bend or dent).
11. The electrical component is required with a safety heat switch, ensuring the heating
element only functions when correctly placed on the fryer.
12. In the case of overheating, the thermal protective device will switch off the fryer
automatically. This device is a small red button found either on the underside of the
electrical component or in the cord storage compartment. It can be reactivated by
pushing the button again with a pointed object (e.g. a pen).
**Disconnect from the power outlet before reactivating!
DEEP FRYER CONTROL
60 0
POWER
50 10
40 20
30
RECOMMENDATIONS
Temperature control knob:
Set between 150-190 C. °