Victor VCT15306 Instruction Manual page 10

24. [TIME/DATE] Time and Date display key
Used to display or program the date and time. Depressing this key once will
cause the date to display, a second depression will display the time. Holding the
key down for three seconds will cause the date or time to flash, this is the
program mode.
25. [0]-[9], [00] & [• • • • ] Numeric keys.
Any numeral over 14 digits will be ineffective. When decimal point key is used
more than once in one numeral, the first decimal point will be considered as
effective.
26. [− − − − ]
Minus key
Subtracts an amount from the accumulator. To subtract the same amount more
than one time (repeat subtraction), enter that amount once and depress the
Minus key as many times as necessary. If this key is depressed immediately
after [%] key, it works as percent minus key.
27. [+] Plus key
Adds an amount to the accumulator. To add the same amount more than one
time (repeat addition), enter that amount once and depress the Plus key as
many times as necessary. If this key is depressed immediately after [%] key, it
works as percent plus key.
28a. [IIT] Memory II Selector key
Model 1570-6
Calculation on memory II by press Memory II key follow by plus, minus, subtotal
or total key.
28b. [N] Item Count key
Model 1560-6 & 1530-6
Calculations with item count.
29. [# / S] Date / Subtotal key
#: It will print live entry as an identifier as an invoice number with "#" mark.
S: It prints but does not clear the accumulator.
30. [T] Total key
Prints and clears the accumulator. When this key is pressed with the "GT" switch
is on, the result is accumulated automatically in the memory register.
31. [MT / Amount] Memory Total key / Amount
MT: Prints and clears the memory.
Amount: If this key is pressed after 10-key input, it is means enter the value as
Total Amount. However, if Interest, Month, and Payment are entered in
prior or modification is done on any of the three as above in prior, user
can calculate / recalculate the Loan Amount by press this key.
10