Table of Contents
Advertisement
1.4 Remote control
14
13
12
11
1
2
3
4
5
6
7
8
9
10
1.5 General technical characteristics
AUDIO:
• L+R (Cinch connector) 2 V nns typical 10 KOhm.
• Headphone (6 mm Headphone socket)
.
8 Ohm - 2
KOhm,
30 mW at 32 Ohm.
• Manual volume control.
VIDEO:
NTSC (525
lines)
or PAL (625
lines)
video
out:
-
RGB (A/V Euroconnector) 0.7 Vp-p
into•
75 Ohm (0.3 Vp-p
into
75 Ohm sync).
-
Y/
C
(Y/
C connector)
1
Vp-p into 75 Ohm•
- CVBS (Cinch connector) 1 Vp-p into 75 Ohm.
CONTROL PORTS:
• Input 1 (miniDIN 8-pin connector) for pointing device.
• Input 2 (miniDIN 8-pin connector) for pointing device or
CD-i keyboard.
• Port #l (D-sub 9 connector) for RS232-C based peripherals. •
• Port #2 (D-sub 9 connector) for RS232-C based peripherals
.
•
• Parallel port:•
- connector: 25 pin D-sub connector.
- standard: Centronics
compatible.
-
function
:
serves as a printer interface or external disk drive
interface.
• AT keyboard connector (PC-AT type). •
• Serial
I/
O port (miniDIN 8 pin connector) for RS based
peripherals (TTL
level)
-like-m0aern-,------ - - -
I. INTRODUCTION
1
Infrared remote transmitter
2
Action button.
3
Thumbpad.
4 Action buttons (for
left
or right handed operation).
5
Volume
up
button.
6 Volume down button.
7
CD-i/
TV button*.
8
Next
track**.
9 Previous track**.
10
Sliding Cover.
11
Standby*.
12 Stop button**.
13
Pause button**.
14
Play button**.
• Not functional on some CD-i player models.
•• Only functional for CD-Audio and some CD-i applications
(see also 3.8).
REMOTE CONTROL: •
- RC6
compatible.
MEMORY:
- 2 x 512 Kb base case RAM+
1.5
Mb (0.5 Mb MPEG + 1.0 Mb
RAM).
- 32 Kb non volatile
RAM.
-
2 x 512 Kb ROM.
CAUTION
(FOR APPLICATION/TITLE DEVELOPMENT)
STANDARD CD-i SYSTEMS NORMALLY HAVE SLIGHTLY
MORE RAM THAN THE 2X480K FREE AVAIIABLE MEMORY.
TO AVOID PROBLEMS DURING APPLICATION/TITLE
DEVELOPMENT IT IS ADVISABLE TO USE ONLY COLORED
MEMORY.
CPU:
68070 at
15
Mhz.
• Not available on some CD-i player models
.
5
Advertisement
Table of Contents
