Drive Led Status; Raid Setup - SanDisk G-RAID MIRROR User Manual

System LED Behavior
Off
Blinking White → Off

Drive LED Status

The Drive LED Status is located on the drive tray. To access these LED
lights, remove the front cover from the G-RAID MIRROR device (Reference
Topic: Drive Replacement). The LED lights are located on the right-hand
side of the drive trays. They include blue, red, and white colored lights to
indicate the status. Reference the table below to see the G-RAID MIRROR
Drive LED Status with the corresponding System LED status.
Table 2: Drive LED Status
System LED
Red and White
Blinking → White
Blinking → Solid
White
Red
Red
Blinking Red
Blinking Red
Solid White
Solid White
Alternating between
Red and White

RAID SETUP

The following information will provide instructions on changing the G-
RAID MIRROR's RAID configuration.
Warning!: Changing the RAID configuration will result in data loss.
SanDisk Professional
User Manual
State
Power Saving
Overheating or Fan
Failure
Drive 1 LED Drive 2 LED
Blue Blue
Red Blue
Blue Red
Red Blinking Blue
Blinking Blue Red
Off Blinking Blue
Blinking Blue Off
Alternating between Alternating between
Red and Blue Red and Blue
Description
Drive is powered on and connected to
host that goes to sleep, suspend or is
powered off.
Drive is powered on, connected to host
and overheating.
RAID Status
Power On
RAID 0 Drive 1 Failed
RAID 0 Drive 2 Failed
RAID 1 Drive 1 Failed
RAID 1 Drive 2 Failed
JBOD Drive 1
Disconnected
JBOD Drive 2
Disconnected
RAID Rebuild
Main Activities
7