VMC-180E 04.10.8 7:03 PM ページ 3 CONGRATULATIONS！ Thank you for purchasing the Vestax VMC-180 Mixing Controller. We suggest that you read through this owner's manual thoroughly so that you may enjoy the full use of this product safely and in the knowledge of all its special features and suitable applications.
● New superior grade crossfader (CF-PCV) fitted to VMC-180 enabling super smooth operation together ● 3-Band isolator with proprietary Vestax infinity cut. with long life. ● User upgradeable, serviceable and replaceable cross fader.
180 when it is worn out. If you wish to use the to each PGM channel. fader unit with slide stroke distance of 45mm, you can replace with the Vestax "IF-37PCV". PGM TRIM See "HOW TO CHANGE THE FADER UNIT".
Use to turn power on Connect to the input of the external effects. (Delay, Reverb etc) POWER INPUT JACK Connect the Vestax AC-12A, AC adaptor (12V MASTER 1 OUTPUT JACK [BALANCED XLR JACK:PIN2-HOT] AC, 1000mA). Connect to the input of power amp...
LOCATE POINT FOCUS ENTER REVERSE LOOP PLAY/PAUSE MONITOR START RELOOP/EXIT PLAY/PAUSE MAIN SPEAKER ［VESTAX VLS-10］ POWER AMPLIFIER［VESTAX DA-X1000］ MIC/AUX IN MIC/A UX IN LINE 1 LINE 1 REC OUT REC OUT R/RW 1 OUT PUT :for "CF-PCV" :for "CF-R" PGM2 PGM1 CD, MD, Player, TAPE DECK, etc.