Sony DAV-HDX285 Operating Instructions Manual page 65

[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no surround speakers are
used.
[SUBWOOFER]
[YES1
• When you change the [CONNECTION] setting, the
[STANDARD] ol' [SPEAKER FORMATION]
setting remains the same, but the other settings ol'
[SPEAKER FORMATION] return to
[STANDARD].
• [DISTANCE (FRONT)]
When yon move the fiont speakers and center
speaker, be sure to set the parameters of the
distance (O) t¥om the listening position to the
speakers.
You can set the parameters t¥om 1.0 to 7.0
meters I) (3 to 23 fl) for the fiont speakers, fiom
0.0 to 7.0 meters 2) (0 to 23 ft) for the center
speaker.
O
2
[L/R1 3.0 m/l 0 ft3): Set the fi'ont speaker
distance.
[CENTER13.0 m/l 0 ft3)'*): Set the center speaker
distance (up to 1.6 meters (5 ft) closer to the
fiont speakers).
I)0.9 to 6.9 meters for North American models.
2)0.0 to 6.9 meters for North American models.
3)When you perform the Quick Setup (page 33), the
default settings are changed.
4)This item appears when you set [CENTER] to [YES]
in the [CONNECTION] setting.
• [DISTANCE (SURROUND)]
When you move the surround speakers, be sure
to set the parameters of the distance (_) from
the listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters l) (0 to 23 It).
2•
/
/
2
[L/RI
3.0 m/l 0
ft2)3):
Set the surround speaker
distance (up to 5.0 meters (16 It) closer to the
l¥ont speakers).
])0.0 to 6.9 meters for North American models.
2)When you perform the Quick Setup (page 33), the
default settings are changed.
3)This item appears when you set [SURROUND] to
[YES] in the [CONNECTION] setting.
• If all from and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• [LEVEL (FRONT)]
You can adjust the sound level of the fi'ont
speakers, center speaker, and subwoofer. You
can set the parameters fiom -6.0 dB to 0 dB for
[L/R1,
and fi'om -6.0 dB to +6.0 dB for
[CENTER] and [SUBWOOFER]. Be sure to set
[TEST TONE1 to [ON1 for easy adjustment.
[L/R] 0.0 dB: Set the fl'ont speaker level.
[CENTER] 0.0 dB*: Set the center speaker
level.
65 GB