Philips MAGNAVOX AZ 1200 Owner's Manual page 12

CD PLAYER
Programming track numbers
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1
Select the desired track with SEARCH
km
or
w>i.
^ 2 As soon as the number of the desired track is displayed, press
the PROGRAM button to store the track in the memory.
PROGRAM appears in the display and
P
lights up briefly.
Then, the number of the stored track is shown.
3 Select and store all desired tracks in this way.
You can review your settings by pressing the PROGRAM button
for more than 2 seconds.
The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks, the display shows
f.
Playing the program
If you have selected the tracks while playback Is stopped, press
PLAY-PAUSE >DD.
If you have selected the tracks during CD play, first press STOP □,
then press PLAY-PAUSE NO.
L/C
PROGRAM
Erasing the program when playback is stopped
From the stop position, press STOP □.
-* n a
lights up briefly, PROGRAM disappears, and your program
is erased.
PROGRAM
no
Note: The program will also be erased if you:
-
interrupt the power supply,
- open the CD compartment, or
-move the
POWER
control
foTUNER orTAPE.
12